±«ÓãÖ±²¥

Excel 10 Fan Coil Unit Controller
High-efficiency sequenced heating and cooling. Easy, direct-wire installation.

Honeywell's Excel 10 Fan Coil Unit Controllers provide application flexibility for two pipe, four pipe or staged heat/cool fan coil unit applications � without the costs or headaches of complex wiring. All four of the Excel 10 Fan Coil Unit Controllers allow line voltage power to be direct wired to the controller transformer and fan speed relays. Reliable temperature and fan speed control, combined with the ease of integrating the Excel 10 Zone Manager into the EXCEL 5000^®  System, give building managers the comfort and energy savings they expect from their DDC control system.

Smart sequencing options conserve
energy and reduce equipment run time

• Set point reset for electrical demand limit control
• Energy-saving heating and cooling setpoints for occupied, unoccupied and standby modes
• Automatic or manual control of fan speed sequencing
• Configurable fan run times for minimum on, minimum off, run-up and overrun

Excel 10 Fan Coil Unit Controller Highlights

Controller Hardware
The Excel 10 Fan Coil Unit Controllers measure 9-1 /4" long x 4" wide x 2-1 /4" high and are available in four models. The W7752D and F models are equipped with an additional 250 VAC 10A power relay for applications with electric reheat. All models have integral DIN rail mounting connections on the back of controller hardware.

Input/Output Data